Name: Vibration Separator GY-450SA
Availability: InStock

Vibration Separator GY-450SA

Category: NOISELESS SEPERATOR FILTER MACHINE

Flour Sieving Machine || flour sieving machines |also known as flour sifters |are used to remove lumps and impurities from flour| aerate it | and ensure a consistent texture. They are essential for achieving smooth and uniform flour for baking and cooking purposes.

Sieving machine flour|sugar| spices|and other powdered ingredients to remove lumps| impurities and achieve uniform particle size|Separating grains| such as wheat rice and corn to remove husks debris and broken grains.|Sifting cocoa powder baking soda and other ingredients to ensure smooth textures in baked goods.Sorting and grading fruits and vegetables by size for processing or packaging. Powder Vibration Separator Sieving traditionally associated with the separation of solids|can also be adapted for certain liquid applications where particle or impurity separation is necessary. However in liquid sieving the terminology might slightly differ; it's often referred to as filtration or liquid-solid separation. Here are some common liquid types for sieving or filtration: Water| Solvents|Oil | Beverages| Pharmaceuticals| Biotechnology

Description

Parts explosion diagram

Eccentric weights
Shock absorption rubber
Screen
Clamp

Specification

Motor (HP)	Voltage (V) (Depend on request)	Frequency (Hz)	Speed (R.P.M)	Effective diameter of screen (mm)	Maximum (or Max) particle size (mm)	Capacity (kg / hr)	Net wt. (kg)
1 / 2	240 / 415	50 / 60	1440 / 1720	450	10 ~ 15	100 ~ 300	44 (w / trolley : 59)

Remark: Flour material mesh #60. Exact capacity depend on the real environment condition.

Application

This machine is ideally for sieving and separating powder, particle and slurry in many industries, such as ceramics, food processing, pharmaceuticals, chemicals, bio-chemicals, electronics, sintering, plastic, rubber, grinding, recycle and etc.

Note

Please check whether the machine model and specification are the same as your order. Power supply is the same as shown on the machine plaque. (Tolerance for voltage is + / - 10 %)
Prior to operate the separator, ensure all the components are fastened, no broken on the sieves, no damage on the machine body, electrical cables and earth are connected properly (do not use a knife switch), and three phase power supply is ready.
The electrical cable comes out from motor should kept 60 mm for free movement. This is to ensure that the cable won’t be torn off during vibration.
The minimum distance from wall is 500 mm, leveling and installing firmly.
The factory setting for relative angle between upper and lower eccentric weights is 45o clockwise. (Upper eccentric weight is fixed, and turn the lower eccentric weight to 45o.).If the performance is not good enough, please refer to the principles and adjust the angle accordingly. Tighten the bolt after adjustment.
Turn off power supply while not in operation. Do not splash water on motor or cables to avoid any leakage current.
Keep the screen clean all the time. Various cleaning detergents may be used according to the material been sieved. Do not apply sharp objects on the screen to avoid any damage.
This separator is suitable for continuous and steadily material feeding. The maximum gap between the outlet of material supply mechanism and the inlet of the separator is 150mm. Alternatively, a buffer equipment can be fit in between. (The separator can not bear any type of external load.) The volume of feeding is based on whether the screens can sieve without piling.
This machine is guaranteed for one year under normal operating condition. Please contact our offices or distributors should any irregularity arise during the one - year period. Do not under any circumstances attempt to make any repairs or replacements.